X9800 Single Frequency IR Flame Detector
NOT ALL CONFIGURATIONS ARE AVAILABLE
The X9800 IR Flame Detector meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The detector is equipped with dual signal processing
The X9800 IR Flame Detector (Spec Sheet: 90-1160) meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The detector is equipped with dual signal processing (Quick Fire high speed operation and Time Domain Signal Analysis) and automatic/magnetic manual oi (optical integrity) test capability. The detector has Division and Zone explosion-proof ratings and is suitable for use in indoor and outdoor applications.
The standard output configuration includes fire, fault, and auxiliary relays with RS-485 Modbus. Optional 0-20 mA, Pulse, Eagle Quantum Premier , or HART outputs are also available. A model with pulse output is available for easy retrofitting into existing Det-Tronics R74XX controller-based systems.
The X9800 housing is available in aluminum or stainless steel, with NEMA/Type 4X and IP66/IP67 rating. Typical applications include: printing, petrochemical, automotive, and dirty environments.
• Models available with SIL 2 certification
• Unequaled false alarm rejection, TDSA
• Tricolor LED on detector faceplate indicates detector status condition
• Ultra High speed capability
• Heated optics for increased resistance to moisture and ice
• Automatic, manual, or magnetic oi testing
• Optional HART output and AMS aware
• Tricolor LED indicates normal operation, fire, and fault conditions
• FM, CSA, ATEX, and IECEx
• EN 54 part 10 certified by BRE, LPCB
• Mounting arm allows easy sighting
• Integral wiring compartment for ease of installation
• Terminal block allows for Class X Pathway Designation per NFPA 72
• Meets NFPA 33 response requirement for under 0.5 seconds (available when model selected)
• Built-in data logging / event monitoring
• Models available with integral Explosion-proof camera option (xWatch)
| Color | Red |
|---|---|
| Manufacturer | Det-tronics |
| Approvals | UL |
| Type of Tecnology | Infrared flame |
| IP Rate | IP66 |
| Analog Protocol | Det-Tronics |
| addressing | No |
| Intrinsically Safe | No |
| Electrical Specifications | 24V |
| Operating Temperature Range | -40 | +75 |
| Relay | No |
| Marine Approved | No |
| SIL Approved | No |
| Icon | Label | Description | Type | Size | Download |
|---|---|---|---|---|---|
|
NF-SSI Certified Addendum for X2200, X5200G and X9800 Flame Detectors - Instructions | NF-SSI Certified Addendum for X2200, X5200G and X9800 Flame Detectors - Instructions | 330.6 KB | Download | |
|
|
REACH Article 33 Communication - X2200, X5200, X9800 Flame Detectors | REACH Article 33 Communication - X2200, X5200, X9800 Flame Detectors | 331.4 KB | Download | |
|
|
X9800 Single Frequency IR Flame Detector - HART Communication Addendum | X9800 Single Frequency IR Flame Detector - HART Communication Addendum | 1 MB | Download | |
|
|
X9800 Single Frequency IR Flame Detector - Instruction Manual | X9800 Single Frequency IR Flame Detector - Instruction Manual | 528.7 KB | Download | |
|
|
X9800 Single Frequency IR Flame Detector - Specifications | X9800 Single Frequency IR Flame Detector - Specifications | 682.5 KB | Download | |
|
|
X-Series Flame Detector Mounting Arm and Collar Attachment | X-Series Flame Detector Mounting Arm and Collar Attachment | 402.5 KB | Download | |
|
|
X-Series Flame Detectors with Pulse Output | X-Series Flame Detectors with Pulse Output | 1.1 MB | Download | |
|
|
X2200 X5200 X9800 Safety Manual | X2200 X5200 X9800 Safety Manual | 539.8 KB | Download |
