XP95 VAD BASE CAT. O (WHITE FLASH) - ISOLATING
The XP95® Visual Alarm Device (VAD) Base incorporates a loop-powered VAD with a standard mounting base. It is used to signal a visual fire alarm warning in enclosed areas.
The XP95 VAD Base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device. The VAD Bases are supplied with a built-in isolator. A version without an isolator is also available.
FEATURES
The product offers:
- EN54-23 Compliant Category O. VAD
- VAD flash rate of 0.5Hz
- Synchronised with the Apollo Protocol
- Individual and group addressing
- Automatic LED check when VAD activated
- Built in short circuit Isolator
Group addressing is a simple method of alerting an entire area or group of rooms without delay.
For systems requiring isolators at every point the built-in isolator saves installation time and cost.
The VAD self test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the VAD Base has been switched on a fault signal is transmitted when the device is next polled.
| Color | White |
|---|---|
| Manufacturer | Apollo |
| SIL Approved | No |
| Marine Approved | No |
