ASD531
SecuriSmoke ASD 531 – simple and convenient for smaller premises
The ASD 531 offers quick commissioning and the highly professional monitoring of smaller areas and premises, and all without the need for training.
The detector is configured directly on the device without the need for a PC and operation is uncomplicated.
As with the two larger models, it is also equipped with the tried-and-tested HD detector with LVSC (large-volume smoke chamber).
This results in outstanding sensitivity combined with an impressively long service life.
Analysis unit for automatic air sampling with high sensitivity optical detection system (HD sensor). Suitable for the protection of small areas, 1 channel for max 75 m of pipe d.25mm and max 12 holes, in Basic configuration or with ASD PipeFlow software.
Sensitivity: min. 10% - max. 0.02% obs / m (resolution 0.001% obs / m). 2 relay outputs for alarm and fault. LED signals for power supply OK, fire alarm, fault and dirty detector; Reset button. On-board programming via switch. 24 Vdc power supply. Max absorption 85mA.
Operating temperature: -10 ° C to + 55 ° C. Gray ABS container. Dimensions: 195 (L) x 333 (H) x 140 (P) mm. Degree of protection IP 54. EN 54-20: 2006 certified. VDS approved. use a 24V-1,5 / 2A power supply (batteries min.2x7Ah). Complete with high sensitivity optical detector IRSRASD531.
| Color | Gray |
|---|---|
| Manufacturer | Hochiki |
| Approvals | EN 54-20: 2006, Vds |
| Type of Tecnology | Smoke detector, aspiration revelation |
| IP Rate | IP54 |
| addressing | No |
| Intrinsically Safe | No |
| Electrical Specifications | 24 Vdc |
| Operating Temperature Range | -10°C TO +55°C |
| Relay | Yes |
| Marine Approved | No |
| SIL Approved | No |
