ASD535-1
SecuriSmoke ASD 535 – the flagship model for large-scale applications
The ASD 535 aspirating smoke detector monitors large facilities with areas of up to 5,600 square metres. It is available with one or two sensors. Up to 400 metres of sampling pipe with a maximum of 120 sampling points in total can be connected to each sensor. With over 400 Pa of aspirating underpressure, the ASD 535 has one of the most powerful fans on the market. It is perfect for use in harsh environments, such as deep-freeze areas, explosion hazard areas or rooms with high levels of contamination. Thanks to the new “Config over Line” function, the detectors can be configured and serviced from the fire alarm control panel.
Analysis unit for automatic air sampling with high sensitivity optical detection system (HD sensor) model ASD 535-1. Suitable for the protection of both small and large areas, 1 channel max 240 m for pipe d.25mm and max 48 holes in Easy configuration, max.300m (120 holes) with ASD PipeFlow software; Sensitivity: min. 10% - max. 0.02% obs / m depending on the sensor used (resolution 0.001% obs / m).
3 relay outputs for alarm and fault. LED signals for power supply OK, fire and fault alarm, reset button. USB port for PC. 24 Vdc power supply. Absorption 305mA. Operating temperature: -30 ° C to + 60 ° C. Gray ABS container. Dimensions: 265 (L) x 348 (H) x 148 (P) mm. Degree of protection IP 54. EN 54-20: 2006 certified. VdS, FM, CNAL approved. Use a 24V-1,5 / 2A power supply (2x17Ah batteries). High sensitivity optical detector cod. IRSRSSD535-3 to be ordered separately.
| Color | Gray |
|---|---|
| Manufacturer | Hochiki |
| Approvals | CNAL, EN 54-20: 2006, FM, Vds |
| Type of Tecnology | Smoke optician, Smoke detector, aspiration revelation |
| IP Rate | IP54 |
| addressing | No |
| Intrinsically Safe | No |
| Electrical Specifications | 24 V-1,5/2A (battery 2x17Ah) |
| Operating Temperature Range | -30°C TO +60°C |
| Relay | Yes |
| Marine Approved | No |
| SIL Approved | No |
